Station Name Sign
Station Name SignStation Name Sign (Pole)
A platform station name board, 4 blocks wide and 1 block tall. Place it inside a station group range and it automatically displays the station name, line color and neighboring stations, on both faces. There is no UI — everything shown is derived from the station group and the assigned line symbol.
Placement
- Hold the sign and right-click where you want it. The display face turns toward you.
- It needs 4 blocks of horizontal space. If the space is blocked, placement is cancelled and no item is consumed.
- Breaking any of the 4 cells removes the whole sign and drops the item.
Pole variant (hanging)
The pole variant adds a hanging pole at each end, for a total height of 2 blocks.
- Right-click the underside of a ceiling to hang it: the poles attach to the ceiling and the board sits one block below.
- Placement is cancelled if the pole space (above the two end cells) is blocked.
- Display behavior is identical to the normal variant.
What is displayed
| Element | Content | Requires |
|---|---|---|
| Station name (center) | Name of the station group containing the sign | Sign inside a station group |
| Line symbol badge | Left of the station name | A line symbol assigned to a Create station inside the group |
| Color band | Band below the name; color = the symbol's border color | Same as above |
| Neighboring stations | White text at both ends of the band | Another station group connected by track |
- Renames and symbol changes propagate to the sign within a few seconds.
- Neighbors are resolved from the track network: starting at this station, the first different station group found in each direction along the track is shown. Left/right assignment follows the sign's facing automatically.
- After changing tracks or station groups, the neighbor display may take up to ~30 seconds to refresh.
Troubleshooting
- Nothing is displayed → the sign is outside any station group range.
- No band / badge → no line symbol is assigned to the station. Assign one in the Management Computer's line symbol tab.
- No neighbors → check that tracks actually connect to the neighboring station and that it has its own station group.