BelugaLab
WikiTrain System Utilities

Memory Card

Memory Card

A general-purpose link card for linking rail networks and station blocks to a Management Computer, or for registering Platform Screen Doors / Platform Fences as a group. Used in two steps: first "save" a position, then "apply" it to another block.

Basic usage

  1. Save: Right-click the link source (track / railway management block / platform screen door, etc.) to record its position on the card.
  2. Apply: Right-click the link target (usually a Management Computer) to apply the recorded content.
  3. The card's current saved content can be checked in the item's tooltip.
  4. Shift + right-click (on empty space or a non-target block) to reset the card.

What the Memory Card can operate on

TargetRight-clickShift + right-click
Create trackSave the rail network (records station / signal / train counts)(reset)
Railway Management BlockSave that station block (with station name)(reset)
Management ComputerLink the saved rail network / railway management block(reset)
Platform Fence / Platform Screen DoorRegister the connected fences / doors together as a groupRemove that member from the group

Common procedures

Link a rail network to a Management Computer

  1. Right-click any track on the line → "Rail network saved" is shown.
  2. Right-click the Management Computer → "Rail network linked".
  3. The rail network now appears in the Management Computer's route map / train list.

Bind a station's railway management block to a computer

  1. Right-click the railway management block on the station platform to save it.
  2. Right-click the Management Computer to link.

Group platform screen doors / platform fences

  1. Right-click one of the doors / fences, and the adjacent connected blocks are automatically registered together.
  2. Exclude extra members with Shift + right-click.
  3. For the group's station linkage, see Platform Screen Door.

Mode-independent

Linking / reading with the Memory Card works regardless of access mode (Private/Public).