Train Detection Card
Train Detection Card
A held auxiliary card that records a single specific point on a track as a "place that reacts when a train passes." The recorded point is used in the Railway Management Block's SAS Announcement as a trigger to "play an announcement when a train passes this point."
Holding / usage
This card has no dedicated settings GUI. You just hold it, right-click a track, and record a point. The detailed conditions (target train, announcement content, etc.) are set afterward in the railway management block's GUI.
- Put the Train Detection Card on your hotbar and hold it.
- Right-click the track block (Create's track) you want to record (by default, the right mouse button).
- Right-clicking something other than a track shows a message to the effect of "This is not a track" and nothing is recorded.
- On a successful record, "Point recorded (coordinates)" is shown at the bottom of the screen.
- The recorded coordinates can be checked in the tooltip when you hover the card.
- Shift + right-click (right-click while sneaking) clears the recorded point.
Operation summary
| Operation | What happens |
|---|---|
| Right-click a track | Record that track point as a detection point |
| Shift + right-click | Clear the recorded point |
| Hover over the card | Check the recorded coordinates in the tooltip |
Usage with the Railway Management Block
The recorded card becomes an actual trigger through the following flow.
- With the steps above, record the track point where you want an announcement to play.
- Right-click to open the Railway Management Block, then open the SAS Announcement Settings.
- In the announcement settings, insert this recorded card into the detection-card slot.
- Now, when a train passes the recorded track point, the configured announcement plays.
Integration
- Used as the playback trigger (pass-through detection point) for SAS Announcement